Skip to content

Spray cork render in Devon

Sprayed cork is a flexible, textured coating made mostly from natural cork. It's sprayed onto the wall in thin coats, goes over most sound walls and render, and gives a water-repellent finish that moves with the building. We offer it as a finish on homes across Devon.

Natural cork

sprayed on in thin coats

Flexible

flexes with small movement in the wall

Goes over

most sound walls, render and lime

Not EWI

can improve thermal performance, but it isn't a board system

Flexible wall coating

What spray cork is, and what it does

Spray cork is a decorative and protective coating, sprayed in layers to build a finish a few millimetres thick. It's breathable and flexible, it copes better than a hard render with small movements in the wall, and it gives a soft, lightly textured look that suits modern houses and old cottages alike.

It can go over almost any sound surface: existing render, brick, block, stone, and the lime systems on our lime rendering page. That's why it's a finish that sits across several of our services rather than a service of its own.

Now the honest bit. Spray cork is sometimes sold as insulation. A thin cork coating can improve thermal performance a little, but it isn't a substitute for an insulation board system. If cutting heat loss is the goal, that's external wall insulation, finished in silicone.

A coating can't fix a failing wall either. If the render underneath is cracked or blown, it needs render repairs first, or the cork comes away with it.

Spray cork, silicone render or insulation

People often ask for cork when what they actually want is one of these. Here's how they compare.

FeatureSpray corkSilicone renderExternal wall insulation
What it isA sprayed cork coating, a few millimetres thickA thin-coat render over a base coat and meshInsulation boards fixed to the wall, then rendered
Goes overMost sound walls, render and limeMasonry, insulation and render boardSolid walls, with a render finish on top
Warmer wallsCan improve thermal performance; not a substitute for a board systemNoYes, this is what it's for
MovementFlexible, covers hairline cracksSlightly flexibleRigid board, flexible finish
FinishTextured, in a range of coloursFine textured grainUsually a silicone thin-coat

Want warmer walls? Tell us that at the survey and we'll price insulation as well, so you can compare.

Where spray cork earns its place

Cork earns its place on four kinds of job.

Over tired render

Sound render that's cracked, patched or just tired, given a new flexible skin without taking it all off.

On lime and older walls

A vapour-open topcoat on lime render, where a sealed paint would do harm.

Exposed walls

Walls that take a lot of weather, where a flexible, water-repellent coating earns its keep.

A change of colour

A textured finish in a new colour, without stripping the render underneath.

How spray cork is applied

Cork goes on in thin coats that each need time to firm up, so we plan around dry weather and give you a realistic timescale.

  1. Survey and quoteWe check what's on the wall now, make sure cork is the right call, and put it all in writing.
  2. Scaffold and protectionScaffold up where it's needed, then everything masked: windows, doors, paths and planting.
  3. PrepThe wall washed down, loose material off and cracks filled, with a primer where the surface needs it.
  4. Spray coatsSeveral thin coats sprayed on and built up to an even texture.
  5. Check the finishEdges tidied and the texture checked once it's firm.
  6. Unmask and clean upMasking off, the site cleared and a walk round together.

Spray cork questions

Warm Wall Exteriors logo on a textured wall finish
What is spray cork?

Spray cork is a coating made mostly from granulated natural cork and water-based binders, sprayed onto the wall in thin coats. It builds up into a flexible, textured, water-repellent finish that goes over most sound walls and render.

Is spray cork insulation?

Not in the way an insulation board system is. A thin cork coating can improve thermal performance, but it shouldn't be presented as equivalent to a conventional external wall insulation board system. The benefit depends on the product, the thickness and the wall. If warmer walls are the main aim, external wall insulation is the job to look at.

What can spray cork go over?

Most sound surfaces: existing render, masonry, blockwork and lime render. The wall needs to be clean and firmly stuck together first, so anything loose comes off before we spray.

Does spray cork need painting?

No. The colour is in the coating, so there's no initial painting. It comes in a range of colours, and we'll go through them with you at the survey.

Is spray cork any good for old houses?

It can be a good fit, because it's vapour-open and flexible. On cob, stone and older solid walls it works as a topcoat over lime render, where a sealed masonry paint would trap moisture. We'll look at the wall first and say if it suits.

How much does spray cork cost?

It depends on the size and state of the walls, how much masking and prep is needed, and the number of coats. We'll give you a written quote after the survey, and we'll price silicone render or insulation alongside it if either would suit you better.

Free quote

Tell us about
your walls

A name, a number and a rough idea of the job is plenty. We'll come out, have a proper look and give you a written quote.

We work across Devon, from Barnstaple and Bideford to Exeter and Plymouth, and over the border into Cornwall and Somerset. Send a postcode and we'll arrange a time to come and see you.

Rather talk? Ring 07951 779552

Cookie settings

Choose which cookies we can use. You can change this at any time from the "Cookie settings" link at the bottom of every page. More about the cookies we use.

Strictly necessary cookies
Strictly necessaryAlways on

Needed for the site to work, for example remembering your cookie choice. These can't be switched off.

Analytics cookies

Google Analytics tells us which pages are read and how people find the site. It doesn't identify you. Off unless you switch it on.