Silicone render in Devon
Silicone render is a thin, through-coloured finish that goes over a reinforced base coat. It's water-repellent, resists dirt build-up and no initial painting is required. We apply it on brick and block houses, new builds and extensions, and it's the finish specified on most of our insulated walls.
Thin-coat
a few millimetres over a reinforced base
Through-coloured
no initial painting required
Water-repellent
sheds rain and resists dirt build-up
Free survey
we check the wall before we recommend anything
Thin-coat render
Silicone finishes, and where they work
Silicone render is a thin-coat decorative render with silicone resin in the mix. It goes on at just a few millimetres thick over a prepared base, comes coloured all the way through, and repels water while still letting vapour out of the wall. That combination helps it stay cleaner and sharper for longer.
It's a finish rather than a whole system, which is why it sits across several of our services. It goes on our external wall insulation jobs, on timber frame render systems, over a sand and cement base as part of traditional rendering, and on the breathable lime rendering systems we use for older houses.
Grain, texture and colour look different on a real wall than they do on a screen, so this is something we'd rather talk through with you in person, with the house in front of us.



Render colours and finishes
Silicone, monocouche or sand and cement
All three are coloured finishes you'll see on Devon houses. Here's how they differ in the ways you'll actually notice.
| Feature | Silicone thin-coat | Monocouche | Sand and cement |
|---|---|---|---|
| How it goes on | Base coat and mesh, then a thin finish coat | One coat, usually by machine | Two or three coats, by hand |
| Colour | Through-coloured | Through-coloured | Usually painted |
| Painting | No initial painting required | No initial painting required | Painted, then repainted over time |
| Finish | Fine textured grain | Scraped texture | Smooth or textured |
| Over insulation | Yes, as part of an approved system | No | No |
| Weather | Water-repellent, resists dirt build-up | Weather-resistant, colour runs through | Relies on the masonry paint |
Not sure which suits your house? Send us a photo and we'll have a good idea before we visit.
Where we use silicone render
Most of our silicone work falls into one of four jobs.
Over external wall insulation
The finish specified on most insulated render systems. If you're insulating, this is almost certainly what the outside will be. See external wall insulation.
Re-rendering
Tired or painted render taken back, a new base coat and mesh, then a silicone finish. No initial painting, and far less upkeep than a painted finish.
New builds and extensions
A clean, even finish on fresh blockwork, in a colour from the chart.
Timber frame
The thin-coat finish on render board and wood fibre systems. See timber frame rendering.
How silicone render is applied
Each coat needs the right conditions to cure, so we plan around the weather and give you a realistic timescale.
- Check the backgroundWhatever's underneath has to be sound, clean and suitable. If it isn't, we sort that first.
- Beads and base coatCorners and edges beaded, then a base coat across the whole face.
- MeshReinforcing mesh bedded into the base coat to help stop the finish cracking.
- PrimeA primer to even out suction and help the colour come through true.
- TopcoatSilicone floated to your chosen texture, a full wall at a time to avoid visible joins.
- Clean-up and handoverScaffold down, site tidied and a walk round together.
Silicone render questions

What is silicone render?
Silicone render is a thin-coat finish, a few millimetres thick, applied over a reinforced base coat and mesh. It's through-coloured, so no initial painting is required, and the silicone in it makes it water-repellent, so it resists dirt build-up.
How much does silicone render cost?
It depends on the size of the house, the state of the wall, how much prep and scaffold is needed, and whether insulation is going on underneath. We'll give you a written quote after the survey, with the system and colour set out.
Does silicone render need painting?
No initial painting is required, because the colour runs all the way through the render. Over the years it can be washed down, and it can be painted later if you ever want a change.
What colours does silicone render come in?
A wide range from the manufacturer's colour chart, including whites, off-whites, greys and stronger colours. We'll bring the chart to the survey.
What's the difference between silicone render and monocouche?
Both are through-coloured, so neither needs initial painting. Silicone is a thin finish over a reinforced base coat, with a fine texture and water-repellent surface, and it's the finish used over insulation. Monocouche is a thicker cement-based render applied in one coat and scraped back, for brick and block only.
Can silicone render go over external wall insulation?
Yes. External wall insulation is finished with the render specified for the approved system, and that's usually a silicone thin-coat over a reinforced base coat.