Lime render for cob, stone and older homes in Devon
Old walls were built to take in a bit of moisture and let it out again. Lime render lets them carry on doing that. We render cob, stone and older solid-walled houses in traditional and bagged lime renders, and we take hard cement off where it's causing damp.
Vapour-open
so older walls can dry out
Cob and stone
and any older solid wall
Cement off
lime on, where cement is causing damp
Free survey
we check the wall before we recommend anything
Cob, stone and listed buildings
What lime render is, and why old walls need it
Lime render is a lime-based coating applied by hand in coats, used on cob, stone and older solid walls. It's softer and more vapour-open than cement, so moisture that gets into the wall can find its way out again instead of being trapped behind a hard skin. That's what helps keep an old wall dry and sound.
We do two kinds. Traditional lime render is mixed and built up by hand in several coats, the way these houses were rendered in the first place, and it's usually the right choice for listed buildings and careful restoration. Bagged lime renders are lime-based renders that come ready to mix, go on faster and still stay vapour-open. We'll recommend the one that suits the wall and the budget.
The finish is up to you. Lime can be limewashed in a range of shades, finished with a vapour-open silicone texture designed for lime systems, or topped with spray cork. Whatever goes on top, the whole build-up has to stay vapour-open, so we don't put a sealed paint or a cement skim anywhere in it.
Got a brick or block house? You'll want sand and cement, monocouche or silicone render instead.



Lime render vs cement render
If your house is older than about 1920, this is the choice that matters most.
| Feature | Lime render | Sand and cement |
|---|---|---|
| Suits | Cob, stone and older solid walls | Modern brick and blockwork |
| Moisture | Vapour-open, lets the wall dry out | Hard and dense, so moisture is slow to escape |
| Movement | More forgiving of slight movement | Rigid, so it can crack on old walls |
| Curing | Slow, and protected from frost, sun and wind | Quicker |
| Finish | Limewash, vapour-open silicone texture or spray cork | Usually painted |
Not sure what your walls are made of? Send us a photo and we'll have a good idea before we visit.
Restoration and repairs
Where we use lime
Most of our lime work falls into one of four jobs.
Cob houses
Cob is earth and straw, and cement is one of the worst things you can put on it. Lime render protects it and lets it dry.
Stone cottages and farmhouses
Rubble stone rendered or re-rendered in lime, keeping the soft, slightly uneven look that suits these buildings.
Cement off, lime on
Hard cement render that's causing damp taken off and replaced with a breathable lime system.
Warmer old walls
An insulating lime render where a cold solid wall needs help but external wall insulation boards would be wrong for the house.
How we lime render a house
Lime cures slowly and doesn't like frost or hot sun, so we plan the job around the weather and give you a realistic timescale.
- SurveyWe look at what the wall is made of, what's on it now and where damp is showing.
- Written quoteThe system, the finish and an honest idea of timing given the time of year.
- Strip and prepareOld cement off, loose material out, and the wall damped down ready for lime.
- Levelling and base coatsLime render built up in layers, with mesh where the wall needs it.
- CuringEach coat protected from frost, strong sun and drying wind while it sets.
- Breathable finishLimewash, a vapour-open silicone texture or spray cork on top, then a walk round together.
Lime render questions

What is lime render?
Lime render is a lime-based coating applied by hand in coats to cob, stone and older solid walls. It's softer and more vapour-open than cement, so moisture in the wall can escape rather than being trapped, which helps keep old walls dry and sound.
Why can't I use cement render on an old house?
Old solid walls were built to take in and release moisture. Hard cement render can trap it in the wall, which can lead to damp inside and decay behind the render. Lime stays vapour-open and lets the wall dry out.
How much does lime rendering cost?
It depends on the size of the house, the state of the wall, whether old cement has to come off first, and whether you want traditional or bagged lime. Lime is slower than cement render because each coat needs time to cure. We'll give you a written quote after the survey.
Can you paint lime render?
Yes, but only with something vapour-open. Limewash is the traditional finish and comes in a range of shades. A sealed masonry paint would trap moisture and undo the point of using lime.
What's the difference between traditional and bagged lime render?
Traditional lime render is mixed and built up by hand in several coats, and suits listed buildings and careful restoration. Bagged lime renders come ready to mix, go on faster and still stay vapour-open. We'll recommend the one that suits your wall.
How long does lime render take?
Longer than cement. Each coat is left to cure before the next goes on, and lime needs protecting from frost, hot sun and wind while it does. We'll give you a realistic timescale on the quote.