Internal plastering and skimming in Devon
Plastering is where we started, and we still do it. We skim walls and ceilings with a two-coat finish over tired plaster, patched walls and new plasterboard, and leave them smooth and ready to decorate.
2 coats
skimmed on and trowelled smooth
Walls and ceilings
tired plaster, patched walls and new board
Sheeted up
floors and furniture protected before we start
Free quote
we see the room before we price it
Plasterers in North Devon
What skimming is
Skimming is a thin finishing plaster, applied in two coats and trowelled smooth, that gives walls and ceilings a flat, clean surface ready for paint. It's the usual answer for tired or patched plaster and new plasterboard.
Most of the job is preparation. We sheet the room up, fill minor cracks, and seal the surface with PVA or a bonding primer so the new plaster grips and doesn't dry too fast. Then two coats go on and get trowelled up to a smooth finish.
Textured ceilings like Artex need checking before anything else. Older textured coatings can contain asbestos, so we'll recommend having a sample tested first. If it's clear, we seal and skim over it. If it isn't, we'll talk you through the safe options before anything is disturbed.
We use British Gypsum plasters. And if it's the outside walls that need attention, that's our render repairs and rendering work.



Skim, patch or replaster
Not every tired wall needs a full skim, and not every wall can take one. Here's how the options compare.
| Feature | Skim | Patch repair | Full replaster |
|---|---|---|---|
| What it is | Two thin finishing coats over a sound surface | Filling and resurfacing a damaged area | Old plaster hacked off and the wall plastered again |
| Right when | The surface is sound but tired, patched or textured | The damage is small and the rest is fine | Plaster is blown, crumbling or coming off |
| Disruption | One room at a time | Minimal | The most, and plenty of dust |
| Finish | Smooth all over | Can show through paint | Smooth all over |
Not sure what your walls need? Send us a photo and we'll give you a good idea.
Skimming over Artex
Plastering walls, ceilings and boards
Plastering is where the business started, and it's a big part of why our rendering outside is as tidy as it is.
Tired walls
Walls covered in old filler, cracks and years of patching, skimmed back to one flat finish.
Textured ceilings
Checked first, as older coatings can contain asbestos. Once they're clear, sealed and skimmed to a smooth, modern ceiling.
New plasterboard
Taped and skimmed after a renovation, an extension or a new stud wall, and drylined walls brought up to a proper finish.
How a skimming job goes
- Look and quoteWe see the room, check what's on the walls and ceiling, and put a price in writing.
- Book inA date that suits you, with a rough idea of how long we'll be there.
- Sheet upFloors, furniture and fittings covered, sockets and switches loosened where needed.
- Prep and sealCracks filled, loose material off, and the surface sealed so the skim grips.
- Two coatsApplied and trowelled up to a smooth, flat finish.
- Tidy upRoom cleared and swept, with advice on drying and your first mist coat.



Skimming and plastering questions

What is skimming?
Skimming is a thin finishing plaster, applied in two coats and trowelled smooth over an existing wall or ceiling. It gives a flat, clean surface ready for decorating, without the cost and mess of a full replaster.
Can you skim over Artex?
Often, yes, but it needs checking first. Older textured coatings can contain asbestos, so we'll recommend having a sample tested before any work starts. If it's clear, we seal it and skim over it. If it isn't, the right approach depends on its condition, and we'll talk you through the options before anything is disturbed.
How long does fresh plaster take to dry?
Usually a few days to a week for a skim, and longer for a full replaster, depending on the room, the heating and the ventilation. It's ready when it has turned an even, light colour all over. Give it a mist coat before your first proper coat of paint.
Can you skim over old plaster?
Yes, if it's sound and well stuck to the wall. Loose or blown areas are cut out and made good first. If large areas are coming away, a full replaster is usually the better option.
How much does it cost to skim a room?
It depends on the size of the room, the condition of the walls and ceiling, and how much preparation is needed. We'll look at the room and give you a written quote before any work is booked, and tell you whether it needs a skim or a full replaster.