Skip to content

Monocouche and one coat render in Devon

Monocouche is a through-coloured render that goes on in one coat and is scraped back to a textured finish. A quick way to render brick and block that needs less upkeep than painted render, with no initial painting required. We apply monocouche and other one coat renders on homes, new builds and extensions across Devon.

One coat

one render does the job of base and finish

Through-coloured

so no initial painting is required

Brick and block

homes, new builds and extensions

Free survey

we check the wall before we recommend anything

One coat render

What monocouche render is, and where it works

Monocouche is a cement-based render that's coloured all the way through and applied as a single coat, rather than built up in separate base and finish coats. It's usually sprayed on by machine, then scraped back once it has firmed up to give an even, textured finish. It suits sound brick and blockwork, and no initial painting is required.

One coat renders, sometimes called OCRs, are bagged renders that work in a similar way. Some are through-coloured and others are made to be painted. We'll recommend the right one for the wall and the finish you're after.

Monocouche isn't for every wall. It doesn't go over external wall insulation, which takes a thin-coat system, and it's not right for cob, stone and older solid walls, which need a vapour-open lime render. If you'd like a finer, modern finish, have a look at silicone render, and for render built up by hand, see sand and cement rendering.

Through-coloured renders

Monocouche, sand and cement or silicone

All three can look good on a brick or block house. The difference is in how they go on and how much looking after they need.

FeatureMonocoucheSand and cementSilicone thin-coat
How it goes onOne coat, usually by machineTwo or three coats, by handBase coat and mesh, then a thin finish coat
ColourThrough-colouredUsually paintedThrough-coloured
PaintingNo initial painting requiredPainted, then repainted over timeNo initial painting required
FinishScraped textureSmooth or texturedFine textured grain
Over insulationNoNoYes, as part of an approved system

Not sure which suits your house? Send us a photo and we'll have a good idea before we visit.

Where we use monocouche

Most of our monocouche and one coat work falls into one of four jobs.

New builds

Fresh blockwork on self-builds and small developments, rendered and finished in one go.

Extensions

A new extension rendered to match the house, or in a colour that stands apart from it.

Re-rendering

Tired or failing render taken back to the wall and replaced with a through-coloured finish. If only part of it has gone, see render repairs.

Working to a spec

If your architect or builder has specified a particular one coat render, send us the drawings and we'll price it.

How monocouche is applied

Render needs dry, frost-free days to cure properly, so we plan around the forecast and give you a realistic timescale with the quote.

  1. Survey and quoteWe check the wall, talk through the three options and put it all in writing.
  2. Scaffold and protectionScaffold up, windows, doors and paths covered before anything goes on.
  3. PrepOld render taken off where needed, the wall cleaned, and any repairs made first.
  4. Beads and meshCorner and stop beads fixed, and mesh added where the wall needs reinforcing.
  5. Render onThe monocouche applied in one coat to an even thickness.
  6. Scrape back and clean upScraped to an even texture once it has firmed up, then the site cleared and a walk round together.

Monocouche render questions

Rendered garden wall around a patio seating area
What is monocouche render?

Monocouche is a through-coloured, cement-based render applied as a single coat and scraped back to a textured finish. The name is French for 'single layer'. Because the colour runs all the way through, no initial painting is required.

What's the difference between monocouche and sand and cement render?

Sand and cement is built up by hand in two or three coats and is usually painted. Monocouche goes on as one coat, is usually machine applied, and is through-coloured, so no initial painting is required. Both suit brick and block, and we'll recommend the one that fits the house.

Can monocouche go over external wall insulation?

No. External wall insulation is finished with the render specified for the approved system, usually a silicone thin-coat over a reinforced base coat. Monocouche is for brick and block walls.

Can monocouche go on an old stone or cob house?

We wouldn't recommend it. Cob, stone and older solid walls need to stay vapour-open, so they're better suited to a lime render.

What colours does monocouche come in?

Monocouche comes in a range of set colours from the manufacturer's chart. We'll go through the options with you when we quote.

How much does monocouche render cost?

It depends on the size of the house, access and scaffolding, how much old render has to come off and the colour you choose. Monocouche goes on in one coat, which can save time on site compared with sand and cement. We'll look at the walls and give you a written quote, so you know exactly what's included.

Free quote

Tell us about
your walls

A name, a number and a rough idea of the job is plenty. We'll come out, have a proper look and give you a written quote.

We work across Devon, from Barnstaple and Bideford to Exeter and Plymouth, and over the border into Cornwall and Somerset. Send a postcode and we'll arrange a time to come and see you.

Rather talk? Ring 07951 779552

Cookie settings

Choose which cookies we can use. You can change this at any time from the "Cookie settings" link at the bottom of every page. More about the cookies we use.

Strictly necessary cookies
Strictly necessaryAlways on

Needed for the site to work, for example remembering your cookie choice. These can't be switched off.

Analytics cookies

Google Analytics tells us which pages are read and how people find the site. It doesn't identify you. Off unless you switch it on.